Видео

Gravity and the build plate weight already takes care of backlash, its only usefull on horizontal axis. Its completely unnecessary on Z if it moves nice and freely.

I frustrated with 3d printer Qidi x-smart.. failed for 12 time. I try changed time speed or slow, hot low or up, etc but still bad. wrong with them.

Just ordered some black and white and 250g of red petg for €7 because I want to try printing with petg.

Its a 32 bit board with an STM32F103RET6. it usesTCM2208 for bed and extruder, it uses TCM2160's for the X and Y Bought it Amazon last month for 250,- works flawless if you know how they WORK...

in your experience which is the best wood filament out there ? thanks in advance

i think your issues due to nozzle size, use .5mm

could you please update the links? all is outdated

Thank you, I’ve been frustratingly failing at putting these one. Now it’s super easy

That tape is called glass tape or glass reenforced tape depending on the marketing of the company that made it. It's layers of thicker plastic than normal sandwiching twisted threads of fiberglass and generally has a stringer adhesive than typical scotch tape. It's pretty uncommon to see it used in packaging these days. When I was a kid and you said "packing tape" what you were talking about was that stuff they had holding the end of the filament but 3" wide. Product being shipped to you never came to you with the tape having let go or having broken during handling.

Are Dupont pins and Jst sm pins the same ?

Can't wait for the next stream!

Does it worth?

Would it be easier to add the rear motor/bearing brackets if you turned the frame on its side? So you're not fighting gravity.

Playing devil's advocate here, I think SunLu are just so proud of their filament and was a bit too eager to get people to review it. "Knowing" we would love it.

absolute bag of shit iv not been able to print owt at all with this shit no matter what settings i use on the whale2

Bro why tf you skipping the first step how tf do i get the cover off...

Great review I just sent an Egloo Pro 3 back after having nothing but problems with it I am looking for a workhorse printer this one looks like it can do the job.

I know it has been 6 years, but... your CR-10S mod collection is gone!

Dude quit whining so much about not getting free shit, most of us don't care how you got it just stick to the topic.

Hey, i have the same machine and id like to try out the tower, i wonder what settings you used, did you change something up in wiibuilder besides temps?

Raising the layer height doesn't squish more. It raises the nozzle further from the bed. At .2 height a 150% first layer height will set the nozzle .3mm from the bed and increase flow proportionately. If you want more squish you need to lower the nozzle closer to the bed. That can't be done by changing the first layer height because if you lower the value here the amount of material decreases also.

Could you post a link to the collapsing sword and the chain mail?

I don't think I like their slicer, but I've only had it for a few days. I updated to 1.1.1, and I don't know if I should download the previous versions. I'm so used to using Cura because it's easy.

Great video - I watched this when you published like a year ago and now I'm watching it again lol.

I am guessing that ASA prints very similar to ABS. This last Christmas I got me and my boys a Bambu P1S - our first printer. My first ASA print failed because a corner lifted. No failures since as I cranked the bed temp to 100°C and pre-heat the printer for maybe 30min. My first ASA print was an RC boat hull for Sripol's 30" long tug boat. Big, thick sections. I've also done well with LW-PLA and a little soft TPU for plane tires. Anyway, Bambu made printing ASA easy. That said, I bought a Qidi X-Smart for my boy for $285, direct from Qidi. That's nice cause they don't charge sales tax. I'll have to set up the X-Smart this weekend and I expect it to perform well.

Came across yr awesome video. Still a Good job since u done it 3yrs ago . I m still using the classic Acrylic Anet A8 with SKR1.4 & TFT35 touch screen 👍and TMC2209 on xy. Works n prints very well silently . Did think of enlarging the bed maybe print some parts before I start or install klipper first .Thanks for sharing ❤

guy we been struggling with the calibration of the Z axis for more than a year and you just gave us the solution (for those interested, it was the unscrewing of the little black rings above the Z axis screws) you're the best bro thank you

Buenas noches, estás haciendo un trabajo fenomenal y estoy montando mi legacy gracias a toda la información y tus videos de youtube, pero tengo un problema con la cama y es que no tengo los archivos para adaptar mi cama de 223cm a la impresora, serías tan amable de pasarme la modificación del soporte de la cama para instalarla en mi máquina? gracias de ante mano y me repito, un trabajo exelente con tus videos

I've never owned or used a Nova3D printer so I have no opinion on its performance, however their water washable resin is bad. I purchased 4 bottles of Nova3D resin 500g bottles through Amazon and the resin they sent me was not only expired (all 4 bottles expired Sept 2023) I had used two bottles to print 1 single 13" model. The resin was no thicker than water in my opinion, and the model I was printing (slightly over 500ml in resin volume) cost me 2 complete 500g bottles to print and then some. Leaving water remain in the vat. I had no failures with this model. I normally use creality resin 1000g bottles and with that I can print 3x models of roughly the same size as the one I printed with extra resin left over. The only reason I used the expired bottles instead of sending all four back was to see if they would print at all and if so how much would print. I've sent the remaining two bottles back. Any company pushing expired resin on customers is bad business. And the expiration date is on the top side of the bottles label so it's not like they couldn't see it wasn't expired. End of life bottles (30 days before expiration date) bottles are usually what I buy because they are cheap and I print immediately on the various printers I have. The resin i purchased was water washable resin.

Call it HEVRON:) Hypercube Evolution Voron.. I wonder why your hypercube is so wobbly and with small 2020 profiles. Was the original not with bigger proifles? Something like 3030 or 4040? Funfact: Bambu Lab uses the Hypercube design under the hood for their big machines...

How hot does this get? Can it print on my desktop while I'm working?

Sup

I've had the TINA2 basic for a week. It's great and it's my first introduction to 3D printing. Regarding octoprint, I installed octopi OS on a spare raspberry pi, and initially I couldn't get it to connect, until someone pointed out that the USB port uses a custom baud rate of 1000000. I had nearly given up, but you click "serial connection" in the octoprint UI and enter 1000000 in the "custom baud rate" field and save. Then select this as the printer baud rate and bingo it connected!

Savage build, dude! Love it

A very little different. Not a big one.

They have the Qidi camera for the x smart 3,.x plus 3, x max 3 on Amazon. They have it in stock at Amazon's warehouse at the moment of writing this comment. It's only $40 on Amazon and gets delivered next day

I got one as a Christmas present and there is filament stuck in the nozzle. I've tried most of the suggested methods to get the filament out but am a little leery to take it apart. Any chance for a video on how to take it apart to change the nozzle?

the dragon burner i just printed out has the fan ducts and the cowl all one piece

I bought a spool holder for the overture

Outstanding! Thanks for the link I would love to try this with my kids next year (they are almost old enough).

Do you know how to fix the fan? I recently broke my fan accidentally by touching it. I got replacement, but it still didn’t work. Both fans probably work, but it just doesn’t spin

Bit of a long shot anyone got the files ? For the mods

How do i get the print option mine doesnt have one anywhere

I mod Ed , upgrade,my mono111 Pullys under x. And extruder double geard boden type. But can't figure the right e steps? Do you know.? I like the little printer It's been good.any thing will help rick

You need to clean the carbon rods because the bearing that they use is self-lubricating ... basically it "dissolves" as you use it and leaves debris behind on the rods. The Bambu Lab X1C/P1/P1S also have carbon rods.

Removing the top or opening the door has been recommended for enclosed printers for years, however, I have never had any problems printing PLA with my printers fully enclosed and I have quite a few enclosed machines, I do have good cooling though and on 2 machines I have extraction fans so maybe that is the reason I can print PLA in an enclosure.

Thank you!

looks great thanks for sharing it this build

Works with Cura as well as their own slicer which is good, because Cura is pretty much the standard for many people. I like it a lot, it's my first 3D printer but this seems simple enough. I've been learning FreeCAD and working on my own practical prints, lots of fun! As for using 1Kg spools, I've been using my dry box which has bearings and I just sit it next to the printer and do it that way.

At 4:33 the problem is a clogged nozzle. Junk caught in the nozzle. Poor Quality of the Plastics used in the filament, or dirt or other contaminants in the filament.